5-153X GU1000 PRECISION 369 Front Drive Position Of Universal Joint

A universal joint is a part that realizes variable-angle power transmission. It is used to change the position of the transmission axis direction. It is the "joint" part of the universal transmission of the automobile drive system. Of course, there are many types of it. Today, our focus is the 5-153X GU1000 PRECISION 369 universal joint .

To meet the angle changes caused by the up and down jumps generated by power transmission, steering and car running, universal joints are also commonly used between the drive axle of the front-drive car and the axle shaft and the wheel axle. Due to the limitation of the axial size, the required deflection angle is relatively large, and ordinary universal joints are difficult to handle. Therefore, various constant velocity universal joints are widely used. In general front-drive vehicles, each half shaft uses two constant velocity universal joints. The universal joint near the transaxle is the inner universal joint of the half shaft, and the outer universal joint of the half shaft is near the axle.

Of course, the same applies to the 5-280X PRECISION 334 universal joint in front-drive cars.