Precautions For Using Bearings

The bearing supplier is a part that fixes, rotates and reduces the friction coefficient of the load during the mechanical transmission process. It can also be said that when other parts move relative to each other on the shaft, they are used to reduce the coefficient of friction during the transmission of the kinetic force and keep the central position of the rotating shaft fixed.

Bearings are a pivotal component in contemporary machinery and equipment. Its main function is to support the mechanical rotating body to reduce the friction coefficient of the mechanical load during the transmission of the equipment. Its accuracy, performance, life and reliability play a decisive role in the accuracy, performance, life and reliability of the host . According to the different friction properties of the moving parts, bearings can be divided into rolling bearings and sliding bearings.

The inner ring of a rolling bearing is usually tightly fitted with the shaft and rotates together with the shaft, and the outer ring is usually matched with the bearing housing hole or the housing of the mechanical part to play a supporting role. The rolling elements are evenly arranged between the inner and outer rings with the help of the cage, and its row shape, size and number directly determine the bearing capacity of the bearing. The cage separates the rolling elements evenly and guides the rolling elements to move on the correct track. Rolling bearings include deep groove ball bearings, angular contact bearings, thrust needle rollers, thrust ball bearings, self-aligning ball bearings, self-aligning ball bearings, combined bearings and other types.

Since bearings are precision parts, they should be used with caution. Even high-quality bearings, if used improperly, will not get the expected results.

1. Keep the bearing and the surrounding environment clean, even the tiny dust that is invisible to the naked eye will have a bad effect on the bearing. Therefore, keep the surroundings clean so that dust does not invade the bearing.
2. Use it with care. Strong impact on the bearing during use will cause scars or indentations and cause accidents. In severe cases, cracks and fractures must be paid attention to.
3. To use special tools for bearings, special tools must be used and cannot be replaced at will.
4. Avoid bearing rust. Sweat will cause rust when holding or putting the bearing. Try to wear gloves and pay attention to corrosive gas of U-Joint With 4 Grooved Round Bearings.